DAEWOO
Year of manufacture : 1998
CNC control model : DAEWOO CNC CONTROL
Maximum turning length (Z-axis) : 650.2 mm
Maximum turning diameter : 650.2 mm
Maximum travel length in the X-axis : 477.3 mm
CNC control model : DAEWOO CNC CONTROL
Maximum turning length (Z-axis) : 650.2 mm
Maximum turning diameter : 650.2 mm
Maximum travel length in the X-axis : 477.3 mm
United States
Colorado
Colorado
Year of manufacture : 1994
CNC control model : MITSUBISHI M 520 M
Length of the working table : 650.2 mm
Width of the working table : 1092.2 mm
Power of the spindle drive : 7.5 kW
CNC control model : MITSUBISHI M 520 M
Length of the working table : 650.2 mm
Width of the working table : 1092.2 mm
Power of the spindle drive : 7.5 kW
United States
Colorado
Colorado
Year of manufacture : 1998
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 300 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 350 mm
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 300 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 350 mm
United States
Minnesota
Minnesota
Year of manufacture : 1999
CNC control model : FANUC 16i-M
Length of the working table : 400.1 mm
Width of the working table : 400.1 mm
Power of the spindle drive : 18.7 kW
CNC control model : FANUC 16i-M
Length of the working table : 400.1 mm
Width of the working table : 400.1 mm
Power of the spindle drive : 18.7 kW
United States
California
California
Year of manufacture : 1997
CNC control model : MITSUBISHI MELDAS 500
Maximum turning length (Z-axis) : 1049 mm
Turning diameter over bed (max) : 569 mm
Turning diameter over cross slide (max) : 370.8 mm
CNC control model : MITSUBISHI MELDAS 500
Maximum turning length (Z-axis) : 1049 mm
Turning diameter over bed (max) : 569 mm
Turning diameter over cross slide (max) : 370.8 mm
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : FANUC 0-T
Maximum turning length (Z-axis) : 38100 mm
Turning diameter over bed (max) : 500.4 mm
Turning diameter over cross slide (max) : 274.3 mm
CNC control model : FANUC 0-T
Maximum turning length (Z-axis) : 38100 mm
Turning diameter over bed (max) : 500.4 mm
Turning diameter over cross slide (max) : 274.3 mm
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : FANUC 16 M
Length of the working table : 400.1 mm
Width of the working table : 400.1 mm
Maximum table load (evenly distributed) : 400.1 kg
CNC control model : FANUC 16 M
Length of the working table : 400.1 mm
Width of the working table : 400.1 mm
Maximum table load (evenly distributed) : 400.1 kg
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : MITSUBISHI M 520
Length of the working table : 650.2 mm
Width of the working table : 449.6 mm
Maximum table load (evenly distributed) : 299.4 kg
CNC control model : MITSUBISHI M 520
Length of the working table : 650.2 mm
Width of the working table : 449.6 mm
Maximum table load (evenly distributed) : 299.4 kg
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 533.4 mm
Turning diameter over bed (max) : 510.5 mm
Maximum power of the main spindle : 14.9 kW
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 533.4 mm
Turning diameter over bed (max) : 510.5 mm
Maximum power of the main spindle : 14.9 kW
United States
Wisconsin
Wisconsin
Year of manufacture : 1998
CNC control model : FANUC 18-M
Length of the working table : 650.2 mm
Width of the working table : 449.6 mm
Maximum table load (evenly distributed) : 299.4 kg
CNC control model : FANUC 18-M
Length of the working table : 650.2 mm
Width of the working table : 449.6 mm
Maximum table load (evenly distributed) : 299.4 kg
United States
Wisconsin
Wisconsin
Year of manufacture : 1994
CNC control model : FANUC OT
Maximum turning length (Z-axis) : 660.4 mm
Turning diameter over bed (max) : 500.4 mm
Turning diameter over cross slide (max) : 330.2 mm
CNC control model : FANUC OT
Maximum turning length (Z-axis) : 660.4 mm
Turning diameter over bed (max) : 500.4 mm
Turning diameter over cross slide (max) : 330.2 mm
United States
California
California
Year of manufacture : 1999
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 14.9 kW
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 14.9 kW
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1997
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Maximum table load (evenly distributed) : 798.3 kg
CNC control model : MITSUBISHI MELDAS 64
Length of the working table : 1198.9 mm
Width of the working table : 500.4 mm
Maximum table load (evenly distributed) : 798.3 kg
26500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1998
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 548.6 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 548.6 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
39500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1999
CNC control model : FANUC 21-M
Length of the working table : 1193.8 mm
Width of the working table : 508 mm
Power of the spindle drive : 14.9 kW
CNC control model : FANUC 21-M
Length of the working table : 1193.8 mm
Width of the working table : 508 mm
Power of the spindle drive : 14.9 kW
United States
Florida
Florida
Year of manufacture : 1997
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 762 mm
Turning diameter over bed (max) : 558.8 mm
Turning diameter over cross slide (max) : 381 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 762 mm
Turning diameter over bed (max) : 558.8 mm
Turning diameter over cross slide (max) : 381 mm
United States
New York
New York
Year of manufacture : 1997
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330.2 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 348 mm
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330.2 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 348 mm
United States
New York
New York
Year of manufacture : 1998
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 279 mm
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 330 mm
Turning diameter over bed (max) : 460 mm
Turning diameter over cross slide (max) : 279 mm
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 439.4 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 439.4 mm
Turning diameter over bed (max) : 510.5 mm
Turning diameter over cross slide (max) : 330.2 mm
United States
Michigan
Michigan
Year of manufacture : 1990
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 355.6 mm
Turning diameter over bed (max) : 450.1 mm
Turning diameter over cross slide (max) : 249.9 mm
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 355.6 mm
Turning diameter over bed (max) : 450.1 mm
Turning diameter over cross slide (max) : 249.9 mm
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : FANUC 15-M
Length of the working table : 1000.8 mm
Width of the working table : 1000.8 mm
Maximum table load (evenly distributed) : 1995.8 kg
CNC control model : FANUC 15-M
Length of the working table : 1000.8 mm
Width of the working table : 1000.8 mm
Maximum table load (evenly distributed) : 1995.8 kg
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : FANUC 16-M
Length of the working table : 1399.5 mm
Width of the working table : 701 mm
Power of the spindle drive : 18.7 kW
CNC control model : FANUC 16-M
Length of the working table : 1399.5 mm
Width of the working table : 701 mm
Power of the spindle drive : 18.7 kW
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : MITSUBISHI M 520 L
Maximum turning length (Z-axis) : 1315.7 mm
Turning diameter over bed (max) : 569 mm
Turning diameter over cross slide (max) : 398.8 mm
CNC control model : MITSUBISHI M 520 L
Maximum turning length (Z-axis) : 1315.7 mm
Turning diameter over bed (max) : 569 mm
Turning diameter over cross slide (max) : 398.8 mm
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : FANUC 15-M
Length of the working table : 500.4 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 14.9 kW
CNC control model : FANUC 15-M
Length of the working table : 500.4 mm
Width of the working table : 500.4 mm
Power of the spindle drive : 14.9 kW
United States
Illinois
Illinois
CNC Lathes and Turning Centers DAEWOO
CNC Lathes and Turning Centers DAEWOO PUMA 8HC-3A [2]CNC Lathes and Turning Centers DAEWOO LYNX 200 B [2]
CNC Milling Machines and Machining Centers DAEWOO
CNC Milling Machines and Machining Centers DAEWOO DMV-500 [3]CNC Milling Machines and Machining Centers DAEWOO DHP-5000 [3]
