- UniMachines
- ›
- CNC Milling Machines and Machining Centers
- ›
- CNC Vertical Machining Centers
- ›
- CNC Vertical Machining Centers DOOSAN
- ›
- CNC Vertical Machining Centers DOOSAN MYNX 6500/50
CNC Vertical Machining Center DOOSAN MYNX 6500/50
CNC Vertical Machining Center DOOSAN MYNX 6500/50 was manufactured by the machine manufacturer DOOSAN. Machine DOOSAN MYNX 6500/50 was built in 2015 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 2015 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Length of the working table | 1400 mm |
| Width of the working table | 670 mm |
| Maximum table load (evenly distributed) | 1000 kg |
| Power of the spindle drive | 15 kW |
| Maximum rotary speed of the vertical spindle | 6000 1/min |
| Travel length X-axis (mechanical feed) | 1270 mm |
| Travel length Y-axis (mechanical feed) | 670 mm |
| Travel length Z-axis (mechanical feed) | 625 mm |
| Maximum feed rate in X-axis | 30 mm/s |
| Maximum feed rate in Y-axis | 30 mm/s |
| Maximum feed rate in Z-axis | 24 mm/s |
| Machine height | 2840 mm |
| Machine length | 3350 mm |
| Machine width | 2674 mm |
| Machine weight | 9 t |
Equipment | |
|---|---|
| FANUC i Series | |
| Technical documentation | |
